The WB-FR Standard Plaster Fire Rated Access Door features a plaster bead trim for use in plaster walls and ceilings. It can accommodate up to ¾” of plaster. Designed for both wall and ceiling application. For walls, this door has an Underwriters Laboratories (UL and ULC), 1-1/2 hour “B” label, with a maximum temperature rise of 250 degrees Celsius after 30 minutes for vertical wall installations. File# R10364. Warnock Hersey International; Pittsburgh, CA 1 hr rating for combustible floor/ceiling applications. Report. # WHl-495-PSH-0191. Warnock Hersey International, Pittsburgh, CA 3 Hr. rating for non-combustible floor/ceiling assembly, Report# WHl-495-PSH-0192. This door may be used in a 2-hour fire rated wall assembly. For fire rated ceilings, this door has been approved by Warnock Hersey International for 3 hours (*max. size to 24” x 36”).
18 ga. cold rolled steel
16 ga. cold rolled steel. 3” wide perforated plaster flange of 24 ga. galvanized material. Space from the plaster mesh flange to the 1/4” safety edge of the door will accommodate 1” of plaster mud.
2” thick mineral wool contained within door cavity
Fully concealed rod hinge.
Allows opening to 170°.
Self-latching direct action latch, opposite hinge. Accepts both key and knurled knob, included with each door.
Standard on all doors
Standard on all doors
White powder coat paintable finish
Standard on all doors
To comply with current fire regulations, largest size acceptable is 24” x 36”
Elevation
Section Detail
Size = A x B (w x h)
Rough wall opening = door size + 1/4”